RIG HOSES
Hydraulic Indicators Compound Pointer Indicators
GM4-Series, bracket mount
GM4P-Series, panel mount
Hydraulic Systems & Sensors
Diaphragm Protector Hydraulic Pressure
Transmitter E17-Series
1:1 Piston Separator Pressure Transmitter
P10038A-Series
DETAILS & SOLUTION
- Large 6-inch dial face
- Mounting: 2-inch male
- NPT
- PSI, kg/cm2, KPa, MPa,
- and BAR
BRAND
- NOV®
- CROWN®
สอบถามข้อมูลเพิ่มเติม
รายละเอียดเพิ่มเติม
 |
 |
 |
 |
 |
 |
CD136 piston type pressure sensor mainly used as pressure monitoring in oil pipeline rise,mud pipeline,and some long distance pressure measurement.The sensor is filled with clean hydraulic oil,and seprate with diaphragm.External media can not go into the cylinder,used for mud and other harsh environment. The max working pressure can reach to 103.4MPa, the diaphragm cup is reasonable, the sensor can not easily blocked or adhesion by mud, and has good anti fatigue performance under repeated extrusion. The CD136 sensor has the characteristic of convenient use of long distance transmission, so that staff can read the data in a distance. The piston and the cylinder body are precision manufacturing, they are good seal, with the use of pressure gauges, provide accurate data for operators , convenient for controlling the pressure of the equipment or pipeline.
Specification
| Features |
| Rugged design over years of service has proven this gauge to be accurate and dependable in extreme conditions. |
| Damper allows operator to adjust gauge sensitivity to ensure accurate readings in all kinds of pumping conditions. |
| pressure units are available: Mpa, Psi, kPa, bar. |
| Tong torque system consists of tong torque load cell, tong torque gauge (installed in the driller display), and hydraulic hose. Load cell installed in the wire line of the power tong, when the drill pipe screws, it will be the pulling force which is proportional with the tightening torque on the wire line rope. This pulling force act on hydraulic fluid through piston of load cell, connect wire line to transmit on the bourdon tube of the gauge. The bourdon tube moves, it makes the pointer through the movement, then indicates the force of the power tong. Use power tong or casing tongs, May not use load cells, connects wire line in power tong or in casing tongs hydraulic pressure source directly. |
|
Specification
| Features | |
| CTP Series | |
| Indicates make-up or breakout torque (in pounds of line pull) for all oilfield tubulars. | |
| 6″ fluid filled gauge. | |
| Operator adjustable target pointer that the driller sets to a corresponding torque requirement. | |
| Models and variations of available to work with all manual tongs. | |
| Capacity ranges from 10,000 pounds to 30,000 pounds of line pull. | |
| CTT Series | |
| Indicates torque in foot pounds applies to each joint when using power tongs to run oilfield tubulars. | |
| Models available for all makes and models of power tongs. | |
| Tension or Compression style load cells available for use in all power tong configurations. | |
| Wide variety of capacities available to suit all applications and tong configurations. | |
| English, Metric or dual scale variations available. | |
Pump pressure Sensors
These pump pressure sensors including gauge protector, 1:1 piston separator, and 4:1 debooster. The systems monitor mud pump operations detect potential problems accurately and efficiently.
